The face of your building

Facades Surrey

A building’s facade defines more than appearance. It shapes performance, longevity and how a place is experienced within its surrounding environment.

Surrey is defined by constraint, Green Belt restrictions, extensive conservation designations and some of the most scrutinous local planning authorities in the South East. For facade contractors, this means that technical capability alone is not enough. The ability to work sensitively within a demanding planning environment is just as important as the quality of the installation itself.

OCL bring both. We work across Surrey’s high-value residential market, its thriving commercial centres, Guildford, Woking, Epsom, and the sensitive infill and conversion schemes that characterise development in the county’s historic towns and villages. Every project receives the same rigorous approach to design, compliance and material quality.

Clients building in Surrey expect a level of finish and attention to detail that reflects the value of the buildings they are creating. Our in-house design team understand this, bringing deep expertise in material specification, planning negotiation support and construction methodology to resolve the challenges that arise in constrained, high-expectation environments.

From early-stage design input through to final inspection, we work as a genuine delivery partner — not simply a subcontractor. That means programme commitment, transparent communication and a finished facade that performs as well as it looks.

Rainscreen Cladding in Surrey

Rainscreen Cladding in Surrey

In a county where planning authorities place significant weight on material quality, visual coherence and contextual fit, rainscreen cladding specification demands more than a performance calculation. The choice of material, finish, joint profile and fixing method all have a bearing on planning acceptability, and getting it wrong early is costly.

OCL bring design-stage expertise to every Surrey rainscreen project. We advise on system and material selection across the full range of options, Aluminium, Stone, Timber, Composite, Terracotta, Zinc, GRC and Brick Slip, with a clear understanding of what Surrey’s planning landscape will and will not support in different contexts.

Fire performance, thermal compliance and long-term durability are engineered in from the outset, so the system that satisfies planning also performs for the life of the building.

Light Weight Steel Framing Systems

Light Weight Steel Framing Systems

Development in Surrey frequently comes with complications, tight urban sites, phased programmes and planning conditions that require careful management of construction impact on neighbouring properties. Steel Framing Systems (SFS) are well suited to these conditions.

Pre-fabricated off-site from cold-rolled, galvanised steel, SFS arrives on site ready to install, reducing wet trade activity, shortening programme durations and minimising disruption in the constrained, often residential settings where Surrey schemes are typically located. The system provides a lightweight but structurally capable substrate for insulation, cladding and internal finishes, suited to the low- to mid-rise residential typologies that dominate Surrey’s planning-approved development pipeline.

OCL deliver the full SFS package, structural design coordination, supply and installation, with manufacturer-backed warranties throughout.

Specialist Rendering Systems in Surrey

Specialist Rendering Systems in Surrey

Render in Surrey carries a different expectation to many other markets. Whether applied to a high-end private residential development in the Mole Valley, a contemporary apartment scheme in Guildford town centre or a commercial building in the Woking Enterprise Zone, the finish quality is non-negotiable, and the specification must support it.

As approved applicators for systems from Alsecco, Envirowall, Sto and Weber, OCL provide the full range of modern render solutions, from through-coloured monocouche to silicone and acrylic systems, each specified for the specific substrate, exposure and aesthetic context of the project. In conservation areas and character-sensitive locations, we work closely with design teams and planning consultants to ensure system selection meets the requirements of the local authority without compromising performance or longevity.

Curtain Walling for Surrey Buildings

Curtain Walling for Surrey Buildings

OCL are approved installers for curtain walling systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco.

Curtain walling in Surrey is largely driven by commercial development and the higher-specification residential sector, schemes where natural light penetration, energy performance and architectural expression are primary design objectives.

OCL are approved installers for systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco. We offer the full range of glazed facade configurations, capped, silicone-glazed, structural bolted, free-span and fire-rated, and manage the complete process from design coordination through to installation and sign-off. In Surrey’s demanding planning environment, this end-to-end management is particularly valuable, ensuring that the installed system reflects the approved design intent precisely, without costly variations or programme delays.

Window Options

Window Options

Aluminium Windows
For Surrey’s commercial buildings and contemporary residential developments, OCL install aluminium window systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco. Aluminium’s slim sightlines, longevity and design flexibility make it a natural fit for the high-specification schemes that characterise new development across the county – delivering clean, considered aesthetics that complement Surrey’s architectural quality expectations.

Aluminium Timber Composite Windows
Surrey’s conservation areas, AONB settings and high-value private residential market frequently call for a different solution. Aluminium timber composite windows from Ideal Combi, Lieb, NorDan, Internorm, Uniform Architectural and Velfac offer the warmth, texture and visual character of timber externally, with the durability and low maintenance of aluminium, achieving U-values as low as 0.7 W/m²K. These systems are particularly well suited to schemes where planning requires a material response sympathetic to the surrounding built and natural environment.

Bespoke Architectural Services in Surrey

Bespoke Architectural Services in Surrey

In Surrey’s high-value residential and commercial market, the quality of secondary facade elements, balconies, balustrades, brise soleil, louvres and mesh facades, is held to the same standard as the primary envelope. These are not afterthoughts; they are visible, structural and in many cases central to the planning approval.

OCL design, fabricate and install bespoke architectural metalwork as an integrated part of our facade delivery, not as a bolt-on. Working from the same design package as the wider envelope, we ensure these elements are coordinated, compliant and finished to the standard Surrey’s design-conscious clients and planners expect.

In a county where planning authorities place significant weight on material quality, visual coherence and contextual fit, rainscreen cladding specification demands more than a performance calculation. The choice of material, finish, joint profile and fixing method all have a bearing on planning acceptability, and getting it wrong early is costly.

OCL bring design-stage expertise to every Surrey rainscreen project. We advise on system and material selection across the full range of options, Aluminium, Stone, Timber, Composite, Terracotta, Zinc, GRC and Brick Slip, with a clear understanding of what Surrey’s planning landscape will and will not support in different contexts.

Fire performance, thermal compliance and long-term durability are engineered in from the outset, so the system that satisfies planning also performs for the life of the building.

Development in Surrey frequently comes with complications, tight urban sites, phased programmes and planning conditions that require careful management of construction impact on neighbouring properties. Steel Framing Systems (SFS) are well suited to these conditions.

Pre-fabricated off-site from cold-rolled, galvanised steel, SFS arrives on site ready to install, reducing wet trade activity, shortening programme durations and minimising disruption in the constrained, often residential settings where Surrey schemes are typically located. The system provides a lightweight but structurally capable substrate for insulation, cladding and internal finishes, suited to the low- to mid-rise residential typologies that dominate Surrey’s planning-approved development pipeline.

OCL deliver the full SFS package, structural design coordination, supply and installation, with manufacturer-backed warranties throughout.

Render in Surrey carries a different expectation to many other markets. Whether applied to a high-end private residential development in the Mole Valley, a contemporary apartment scheme in Guildford town centre or a commercial building in the Woking Enterprise Zone, the finish quality is non-negotiable, and the specification must support it.

As approved applicators for systems from Alsecco, Envirowall, Sto and Weber, OCL provide the full range of modern render solutions, from through-coloured monocouche to silicone and acrylic systems, each specified for the specific substrate, exposure and aesthetic context of the project. In conservation areas and character-sensitive locations, we work closely with design teams and planning consultants to ensure system selection meets the requirements of the local authority without compromising performance or longevity.

OCL are approved installers for curtain walling systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco.

Curtain walling in Surrey is largely driven by commercial development and the higher-specification residential sector, schemes where natural light penetration, energy performance and architectural expression are primary design objectives.

OCL are approved installers for systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco. We offer the full range of glazed facade configurations, capped, silicone-glazed, structural bolted, free-span and fire-rated, and manage the complete process from design coordination through to installation and sign-off. In Surrey’s demanding planning environment, this end-to-end management is particularly valuable, ensuring that the installed system reflects the approved design intent precisely, without costly variations or programme delays.

Aluminium Windows
For Surrey’s commercial buildings and contemporary residential developments, OCL install aluminium window systems from Aluprof, Metal Technologies, Reynaers, SAPA and Schueco. Aluminium’s slim sightlines, longevity and design flexibility make it a natural fit for the high-specification schemes that characterise new development across the county – delivering clean, considered aesthetics that complement Surrey’s architectural quality expectations.

Aluminium Timber Composite Windows
Surrey’s conservation areas, AONB settings and high-value private residential market frequently call for a different solution. Aluminium timber composite windows from Ideal Combi, Lieb, NorDan, Internorm, Uniform Architectural and Velfac offer the warmth, texture and visual character of timber externally, with the durability and low maintenance of aluminium, achieving U-values as low as 0.7 W/m²K. These systems are particularly well suited to schemes where planning requires a material response sympathetic to the surrounding built and natural environment.

In Surrey’s high-value residential and commercial market, the quality of secondary facade elements, balconies, balustrades, brise soleil, louvres and mesh facades, is held to the same standard as the primary envelope. These are not afterthoughts; they are visible, structural and in many cases central to the planning approval.

OCL design, fabricate and install bespoke architectural metalwork as an integrated part of our facade delivery, not as a bolt-on. Working from the same design package as the wider envelope, we ensure these elements are coordinated, compliant and finished to the standard Surrey’s design-conscious clients and planners expect.

Case Studies

WHERE DESIGN MEETS QUALITY

West End Gate
The Residences Buildings, Marylebone, W2
Twelve Trees Park (Phase 1A)
West Ham, E16
Royal Eden Dock
Newham, E16
  • Client

    Berkeley Group

  • Main Contractor

    St William Homes

  • Contract Value

    £7.25m

  • Project Duration

    144 weeks

VIEW PROJECT
Poplar Riverside
Poplar, London E14
  • Client

    Mount Anvil

  • Main Contractor

    Mount Anvil

  • Contract Value

    £9.6m

  • Project Duration

    1) Block A and G – 52 weeks 2) Block B1 and B4 – 57 weeks

VIEW PROJECT
Friary Park
Acton, London W3
West Byfleet
Broadoaks Estate, Surrey KT14
  • Client

    Pellings LLP

  • Main Contractor

    OCL Reclad Limited

  • Contract Value

    £7m

  • Project Duration

    80 weeks

VIEW PROJECT
Angel Wharf
Hackney, London N1
  • Client

    Bellway Homes

  • Main Contractor

    OCL Reclad Limited

  • Contract Value

    £1.3m

  • Project Duration

    30 weeks

VIEW PROJECT
Quadrangle
Wandsworth, London SW17
  • CLIENT

    Mount Anvil

  • Main Contractor

    Main Contractor

  • Contract Value

    £8.5m

  • Project Duration

    82 weeks

VIEW PROJECT
Filaments
Wandsworth, London SW18
  • CLIENT

    Vistry Group

  • Main Contractor

    Vistry

  • Contract Value

    £23M

  • Project Duration

    110 weeks

VIEW PROJECT
Blackhorse Mills
Ferry Lane, E17 London
VIEW ALL PROJECTS

Like what you’ve seen?
Please get in contact to find out more.

CONTACT US